TouchPoint Console Installation and Setup Guide
9
Chapter 1: About TouchPoint Console
Licensing Requirements
Each TouchPoint Console consumes one Device Connector license from System Manager > Licenses within Equitrac
Professional. The Equitrac Professional Standard Edition is licensed for 25 Device Connectors, and expansion packs
can be purchased if required.
Ensure that licenses are applied in System Manager prior to installing TPC. If TPC cannot find a license, errors will
occur.
Network Prerequisites
If you are using DHCP to assign IP Addresses to TouchPoint Consoles, Equitrac recommends configuring the DHCP
server to associate the DCE server by option 230. This value allows the DHCP server to locate and correctly identify
the load file for TouchPoint Consoles. See
on page 18 for instructions.
About This Guide
This guide provides physical setup and basic TPC configuration information only. You must also perform
configuration tasks on the Equitrac Professional server to establish the capabilities and feature set that will be used on
each TouchPoint Console.
Refer to the following sources for additional information:
Document
Description and where to find it
TouchPoint Console User Guide
• Task-based user manual to help end-users perform various cost-recovery
functions through TPC including client and matter allocation, copying
and scanning, fax codes and disbursements.
• PDF format file available on the Equitrac Professional 5.2 (and later)
product CD.
Equitrac Professional Administration Guide
• Complete reference guide for all TPC server-side configuration tasks.
• PDF format file available on the Equitrac Professional 5.2 (and later)
product CD.
