97
Ph
on
ebo
ok
2
Phone or UIM
Select a storing method.
New
. . . Go to step 2 on page 92.
Add
. . . Adds data to the existing Phonebook entry. When storing data on the
UIM, “Overwrite” is displayed.
3
Select a search method
Search the Phonebook
Select a Phonebook entry to be stored
O
o
(
)
The phone number or mail
address is entered
automatically.
See step 2 on page 92 to
edit other items in the
Phonebook entry.
When you store into the
FOMA phone’s
Phonebook, you can
remain the original entry
and store a new entry into a
different location by changing the memory number.
4
l
(
)
YES
If you store the entry in the UIM Phonebook, select “Overwrite” to overwrite the
original entry, or select “Add” to store it as a new entry.
Information
The Phonebook entry does not store the information of “Notify caller ID” included in
Redial/Dialed Calls. To set Caller ID Notification, add “186”/“184” to the phone
number and store it.
Characters that cannot be stored may be replaced by spaces or deleted, and then
stored.
You may not be able to store the information from some sites into the Phonebook.
You can utilize the Phonebook by sorting the entries by group such as
“Company” or “Friend”, or by your interest such as “Baseball” or
“Ceramic art”. You can set a ring tone, vibration pattern, or illumination
by group.
1
m
Phonebook
Group setting
The groups on the UIM are indicated by “
”.
To reset the group names and respective settings by group, which have already
been stored, press
i
(
), select “Reset group”, and then select “YES”.
2
Highlight a group and press
l
(
)
Select an item to be set
Set the contents.
When you select “
Group name”, enter a group name. You can store up to 10
full-pitch/21 half-pitch characters. However, you can store only up to 10
characters (regardless of full-pitch or half-pitch characters) when you enter both
full-pitch and half-pitch characters for a UIM group name.
See step 2 on page 92 for the operations of the other items. However, you cannot
set for groups on the UIM.
Select a stored group, or press
i
(
) and select “Check setting” to check
its settings. However, you cannot check the settings of the groups on the UIM.
3
Press
l
(
).
<Group Setting>
Setting Groups
Summary of Contents for FOMA P906i
Page 92: ...90 ...
