140
S
e
curity Settings
2
Enter a new Face Reader Security Code (four to eight
digits)
YES
When “PIM/IC security mode” is set to “Face reader”, use Face Reader to
release the lock instead of using your Terminal Security Code.
When it is set to “Double security”, use Face Reader for authentication
and then enter your Terminal Security Code to release the lock.
1
Display for releasing Personal Data Lock/IC Card
Lock
Match the face to the guide frame and press
O
o
(
).
Face to the front, and locate the face
within the guide frame. The
recognition frame for the eyes and
mouth is displayed, and the guide
frame becomes green. When the
recognition frame is not displayed or
it comes off, place your face off the
frame; then change the facing
direction of your face to correctly
display the recognition frame.
Perform the operation for authentication with the same facial expression as when
you stored the face data file.
Press
l
(
) and enter your Face Reader Security Code; then you can
operate to authenticate instead of using Face Reader.
For the Face Reader Security Code, see page 139.
When additional storing of the face data file is possible, select “OK” to bring up the
confirmation display asking whether to store additional face data file. Select “YES”, enter
your Terminal Security Code; then you can store additional face data file. When you
cannot store any more face data files, select “OK” to show the Face Data Reading
display. If the shot face is judged as another person, a shutter tone sounds and the
recognition-failed image is saved. Select “OK” to show the Face Data Reading display.
Try authentication using Face Reader again.
When 10 face data files are stored and a new data file is added, the oldest data file is
overwritten.
Use Face Reader to Release Lock
Face Data Reading
display
Guide frame
Recognition frame
If you failed to be authenticated
After you are successfully authenticated by Face Reader, your eye blinking is checked.
Repeat blinking your eyes slowly. When the detection of eye blinking fails, the
authentication also fails.
Even in the same environment as that for the authentication by Face Reader, the
detection of eye blinking may fail. Change the place or the direction of your face, and
then operate.
You can lock dialing from the numeric keys. When using the FOMA
phone for business purposes, private use of the FOMA phone can be
prevented.
■
Unavailable operations
・
Dialing from the numeric keys
・
Initial setting
・
Phonebook (storing, editing, deleting, copying from the microSD card,
sending/receiving using Infrared rays, sending/receiving using iC communication, and
sending/receiving using Bluetooth communication)
・
Phone To/AV Phone To function
・
Mail To function
■
Available operations
・
Dialing from the Phonebook or Voice Dial
・
Dialing from Redial, Dialed Calls, Received Calls, Sent Address, or Received Address
(Only phone numbers stored in the Phonebook)
1
m
Settings
Lock/Security
Keypad dial lock
Enter your Terminal Security Code.
“
” is displayed and Keypad Dial Lock is set.
To release Keypad Dial Lock, perform the same operation.
When “Face reader security” is set to “High”
<Keypad Dial Lock>
Locking Keypad Dial
Information
You can make emergency calls at 110/119/118 using numeric keys even during
Keypad Dial Lock.
Summary of Contents for FOMA P906i
Page 92: ...90 ...