NTT docomo FOMA P906i, Instruction Manual

Page: 140 / 201

138
S
e
curity Settings
You can store your face data files in Face Reader and use it for
authentication when releasing IC Card Lock or Personal Data Lock. To
use Face Reader, you need to store three or more face data files and set
“PIM/IC security mode” to either “Face reader” or “Double security”.
■
Notes on using Face Reader
The dirty camera might result in erroneous operation. Use this function after wiping it
with a soft cloth to clean the dirt off.
In environment where the face is exposed to strong light and the brightness
significantly differs depending on the region of the face, the face will not be recognized
easily. In this case, storing might become difficult or the recognition rate (the rate of
correct identification) might be lowered. Adjust so that the face is exposed to even light.
The face might not be recognized normally when its entire part is exposed to the light
and becomes white.
Storing the face might become difficult or the recognition rate might be lowered when
the face conditions are as described below:
・ When the features of the face (eyes, mouth, nose, and eyebrows, etc.) are hard to
see as they are covered by hair, glasses, or a mask
・ When the brightness significantly differs depending on the region of the face such as
when you are under the light in a dark place
The recognition rate might rise by reacting in accordance with the face conditions such
as by raising the hair so that the eyes, nose, mouth, and eyebrows are clearly visible
(taking the glasses and mask off) or moving to a place where the face is exposed to
even light. The recognition rate rises also by storing the face data file additionally.
The face authentication technology does not completely guarantee that you are
recognized as yourself. Accordingly, we are not at all responsible for damages
resulting from the use of this product by a third party or when the damages are caused
by what you could not use the function because of wrong authentication by Face
Reader.
<Face Reader Setting>
Using Face Reader
To use Face Reader, store 3 or more face data files. You can store up to
10 face data files.
1 m
Settings
Lock/Security
Lock setting
Face reader setting
Enter your Terminal
Security Code Store
OK
Face to the front, and locate the face
within the guide frame. You can
prevent the failure in authenticating
the face data file, which results from
the difference in the position of the
face at storing and authenticating the data.
When your face is recognized, the recognition frame for the eyes and mouth is
displayed and the guide frame becomes green. When the recognition frame is not
displayed or it comes off your eyes and mouth, place your face off the frame; then
change the facing direction of your face to correctly display the recognition frame.
The number of face data files is displayed by the bar on the Face Data Reading
display.
2
Press
O o
( ).
The face data file is shot.
3
Press
O o
( ).
The face data file you have shot is stored. Repeat step 1 through step 3 to store
three or more face data files.
When the third face data file is stored, the message appears telling that Face
Reader can be more easily used by adding face data file.
When you press
r
, the confirmation display appears asking whether to delete
the face data file.
If you try to store the face data file in the same environment, you might not be
able to store it. Change the direction of the face or the place for shooting.
Store
Face Data Reading
display
Stored number bar
Guide frame
Recognition frame