NTT docomo FOMA P906i, Instruction Manual

Page: 49 / 201

47
Before Using
th
e
Hand
set
The time displayed on the FOMA phone is corrected according to the clock information
obtained from the network.
The time is corrected when you show the Stand-by display with “Auto time adjust ON”
set. If you want to set the time with a lag, set the time manually.
Some few second errors might occur. You might not be able to correct the time depending
on the radio wave conditions, or the i-
α
ppli program set for the i-
α
ppli Stand-by display.
When you receive the clock information overseas and the time difference correction
information differs from the previously received one, “Time is adjusted” is displayed and
the time difference is corrected automatically. Press “OK” to update the time and show
Redial, Dialed Calls, Received Calls, sent/received mail messages and others in local
time.
When the time difference is corrected overseas, the sub clock (Japanese date/time,
etc.) is displayed below the clock on the Stand-by display.
Depending on the networks overseas, the time difference might not be corrected.
You can display the time of the specified area under the Stand-by display
clock.
1
m
Settings Clock World time watch ON or OFF
Use
M o
to select an area and press
O o
( ).
About date/time correction function
Information
Unless Set Time is set, the functions which use the clock such as Schedule do not
work correctly. Further, the date/time for redial items and received call records are not
stored.
The set time is retained even when the battery pack is replaced, however, it might be
reset if the battery pack is left removed for a long time. In that case, charge the FOMA
phone and then perform the clock setting.
The sub clock is not displayed while “Set time” is set to “Auto time adjust OFF” or in
Japan.
This function supports clock settings from 00:00 on January 1, 2008 through 23:59 on
December 31, 2037.
<World Time Watch>
Displaying World Time
Information
World Time Watch does not appear when “Display setting” → “Clock” → “Clock
display” is set to “OFF”, or when you use the FOMA phone overseas.
You can advance the time displayed for the overseas country you stay
and for a region of World Time Watch by one hour.
1 m
Settings Clock Summer time ON or OFF
You can set the FOMA phone to send your phone number to the called
party’s phone when dialing. Your phone number is important
information, so take utmost care when notifying your phone number.
This function is available only when the other party’s phone supports
Caller ID.
You can set whether to notify your caller ID on the network.
1
m
Service Caller ID notification
Do the following operations.
Each time you dial out, you can set whether to notify your caller ID.
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
Summer Time
<Caller ID Notification>
Notifying the Other Party of Your Phone
Number
+ m - 1 - 7
Set Caller ID Notification to Network
Item Operation/Explanation
Activate ON or OFF
Check setting You can check the setting contents of “Activate”.
Set Caller ID Notification when Making a Call