NTT docomo FOMA P906i, Instruction Manual

Page: 91 / 201

89
Pu
sh
Tal
k
You can set whether to show the PushTalk Call Receiving display for
when a PushTalk call comes in during i-mode communication.
1 i
i-mode settings i-mode arrival act Select an item.
PushTalk preferred . . .Ends i-mode communication and brings up the PushTalk
Call Receiving display.
i-mode preferred . . . . .Rejects receiving a PushTalk call and continues i-mode
communication. The call is not recorded in Received
Calls.
Vibration setting You can set whether to notify you by the vibration when you try to
get the talker’s right, or when a member’s state changes to
“Connected”.
ON or OFF
Item Operation/Explanation
Information
<Auto answer setting>
When you set to “ON”, calls are automatically answered even when the FOMA phone
is closed regardless of “Setting when closed”.
When you set to “ON”, calls are automatically answered after switching to Hands-free
regardless of “Hands-free w/ PushTalk”. However, the FOMA phone works according
to the setting of “Hands-free w/ PushTalk” if you open the FOMA phone after you
answer a call with the FOMA phone closed.
When you set to “ON”, the ring tone, vibrator, Call/Charging indicator, and backlight
do not work. Calls are not automatically answered during Manner Mode.
<PushTalk arrival act>
If you press
- h
for an incoming voice call while “Answer” is set, the Call Receiving
display appears after you finish the PushTalk communication, and then you can
answer the voice call. To continue the PushTalk communication, press
+ i
( )
and select “Call rejection”, “Call forwarding”, or “Voice mail”.
<Sound setting>
In “Simple” mode, some part of the confirmation sounds (talking right obtained tone,
etc.) become silence during PushTalk communication.
i-mode Arrival Act