143
Security Sett
ings
Call Acceptance
You can receive voice calls, videophone calls, and PushTalk calls only from specified
phone numbers. You can set only the calls you want to accept to be connected. You can
specify up to 20 phone numbers.
This function is valid only when the other party notifies his/her phone number. It is
advisable to activate “Caller ID request” simultaneously.
1
Detailed Phonebook display
i
(
)
Restrictions
Enter your Terminal Security Code
Select an item.
Restrict dialing
. . . . You can dial the specified phone numbers only.
Call rejection
. . . . . You can reject calls from the specified phone numbers.
Call acceptance
. . . You can accept calls from the specified phone numbers only.
Call forwarding
. . . See page 451.
Voice mail
. . . . . . . . See page 448.
The set item is indicated by “
★
”.
When a Phonebook entry contains multiple phone numbers, press
M
o
on the
detailed display to highlight the phone number you will set Restrictions for.
To set Restrict Dialing for multiple phone numbers, first set Restrict Dialing and
press
r
to return to the detailed Phonebook display;
M
o
to highlight the
phone number to be set for Restrict Dialing and continue the operation.
If you press
h
to return to the Stand-by display, additional settings cannot be
done. To do additional settings, release Restrict Dialing for the set phone number
and activate Restrict Dialing again, including the released phone number.
To release Restrictions, perform the same operation.
Restrict Dialing/Call Rejection/Call Acceptance
Information
You cannot set this function for Phonebook entries stored as secret data, and in the
UIM Phonebook.
If you activate “Personal data lock” while “Call rejection” or “Call acceptance” is set,
you can accept all incoming calls.
1
m
Phonebook
Restrictions
Enter your Terminal Security Code
Select an item.
The set item is indicated by “
★
”.
To release all the Phonebook entries set with Restrictions, press
i
(
),
select “Release”, and then select “YES”.
2
Select a Phonebook entry.
The phone number set with Restrictions is displayed.
To release “Restrictions” per phone number, select the phone number you want
to release by following the same steps above, and select “YES”.
You cannot operate the following while “Restrict dialing” is set:
・
Calling up/Referring to phone numbers other than specified
・
Keypad dial (except for the calls to the specified phone numbers)
・
Dialing from Received Calls (except for the calls from the specified phone numbers)
・
Storing/Editing/Deleting Phonebook entries, copying Phonebook entries from the
microSD card, and copying Phonebook entries to the UIM
You can make emergency calls at 110/119/118 even if you set “Restrict dialing”.
When a call comes in from the phone number set with “Call rejection”, or from other
than the phone number set with “Call acceptance”, the call is stored in “Received
calls” as a missed call record and the “Missed call” icon appears on the Stand-by
display. Also, the caller hears a busy tone even if you have set Voice Mail Service or
Call Forwarding Service to “Activate”. However, if you set the ring time for Voice Mail
Service or Call Forwarding Service to 0 seconds, when the FOMA phone is out of the
service area, or when the power is turned off, the busy tone will not be played back,
activating Voice Mail Service or Call Forwarding Service.
You can receive SMS messages or i-mode mail messages regardless of the setting of
“Call rejection” or “Call acceptance”.
Check/Release Restrictions on Phonebook Entries
Information
Summary of Contents for FOMA P906i
Page 92: ...90 ...
