NTN-SNR AXC100Z, Manual

Page: 42 / 244

40
Table 4.6 ____ Lubrication amount of the ball screw drives (Lubrication points with the marking „S“)
Table 4.7 ____ Lubrication amount of the trapezoidal screw drives (Lubrication points with the marking „S“)
Ball screws of the Linear Axis from the series AXC, AXF, AXDL and AXLT
(Drive version SN and SV)
The necessary lubrication amount of the ball screw drives depends on diameter and pitch.
Type
Lubrication amount per lubrication point [cm³]
S__05 S__10 S__16 S__20 S__25 S__32 S__40 S__50
AXC
AXC40 1,0 1,5
AXC60 1,5 1,7 2,0
AXC80 2,0 3,0
AXC100 2,5 3,0 4,0
AXC120 3,5 4,0 5,0 6,0
AXF
AXF100 2,5 3,0 4,0
AXDL
AXDL110 2,0 2,2 2,5
AXDL160 5,0 6,0
6,0 6,5
AXDL240 6,5 7,0
8,0 9,0
AXLT
AXLT115 2,0
3,0
AXLT225 2,5 3,0
4,0
AXLT325 3,5 4,0
5,0 6,0
AXLT455 4,0 5,0 6,0 14,0
Type
Lubrication amount per lubrication point [cm³]
T__03 T__04 T__05 T__06 T__07 T__08 T__10 T__12
AXC
AXC40 2,0
AXC60 2,5
2,5
AXC80 3,0
3,0
AXC100 4,0
4,0
AXC120
5,5 5,5
AXF
AXF100 4,0
4,0
AXDL
AXDL110 2,5 2,5
AXDL160 4,0 4,0
AXDL240 5,5 5,5
AXLT
AXLT115 3,0 3,0
AXLT225 4,0 4,0
AXLT325 5,5 5,5
AXLT455 6,0
Rack and pinion drive of the Linear Axis from the series Baureihen AXS (Drive version M, TH and TV)
The rack and pinion drive is optimally supplied with lubricant by an automatic lubricator in combination with a felt gear wheel.
No additional maintenance is required.
Sliding screws of the Linear Axis from the series AXF
(Drive version GN)
The sliding screws of this Linear Axis are maintenance free.
Trapezoidal screws of the Linear Axis from the series AXC, AXF, AXDL and AXLT
(Drive version TN and TV)
Trapezoidal screws are open drive units without sealing elements which retain the lubricant in the system.
The necessary lubrication amount of the trapezoidal screw drives depends on diameter and pitch.