manualshive.com logo in svg

NTN-SNR AXC100Z, Manual

Share
Download
NTN-SNR AXC100Z Manual Download Page 230

228

9.   Special solutions

In addition to the standard program, a varity customized special solutions could be realized with the NTN-SNR – Linear Axis. Our 
application and desingn engineers develop together with the customers high quality solutions with high efficiency and high user benefits.

For more information please contact our NTN-SNR - application engineers.

Below are some examples of typical special solutions are presented.

 Linear Axis with several sliders 

(Figure 8.2 and 8.3)

 

Figure 8.2 ___ AXC_Z mit with several sliders

Figure 8.3 ___ AXS280M with several sliders

Depending on the type of Linear Axis different solutions can be implemented here.

AXC and AXLT with screw drive

 

•

 One mechanical powered slider, arbitary sliders without powering

 

•

 Several mechanical powerd slider

 

•

 Two slider moving in the oposite direction, powered by a right hand – left hand screw drive

AXDL with toothed belt drive

 

•

 One mechanical powered slider, arbitary sliders without powering

AXC and AXS with toothed belt drive

 

•

 Several sliders with fixed distances

AXC with Toothed belt / Ω - drive, AXS with rack and pinion drive, AXLM

 

•

 Several independent moving sliders

Summary of Contents for AXC100Z





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands