manualshive.com logo in svg

NTN-SNR AXC100Z, Manual

Share
Download
NTN-SNR AXC100Z Manual Download Page 31

29

3.7.3 

Drive assembly on Linear Axis and Linear Tables with screw drive

The assembling of drives on Linear Axis and Linear Tables with screw drive and coupling cone is carried out according to the following 
steps (Figure 3.13):

 

1.    Insert the coupling hub 

2

 on the drive or gearbox shaft. The dimension A (Figure 3.14) from Table 6.24 in Chapter 6.2.4.2 

and dimension B when using an optional intermediante flange 

5

, should be considered. 

 

2.   Tighten the clamping screw 

3

 with the required tightening torque according to Chapter 3.5 Table 3.3.

 

3.   Insert elastomeric gear rim 

4

. For drives with feather key and shaft diameter 19 and 24 mm the elastomeric gear rim is 

drilled through. A shorter feather key for excchange is delivered as well. 

 

4.   Insert the drive with the coupling hub 

2

 in the coupling hub from the Linear Axis and screw it with the coupling cone 

1

. 

Figure 3.13 __ Drive assembly on Linear Axis with screw drive 

Figure 3.14 __ Mounting dimension

Summary of Contents for AXC100Z





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands