NTN-SNR AXC100Z, Manual

Page: 188 / 244

186
6.2.3.3 Mounted gearboxes
Linear Axis of the AXS series are normally delivered with mounted gearboxes. For Linear Axis with rack and pinion drive and telescopic
axis is the pinion directly mounted on the gearbox shaft and exactly aligned to the rack during assembly.
The Linear Axis AXS280Y is produced with integrated planetary gearbox in the version ZP. The data of these version are described
in chapter 6.2.3.
In the Linear Axis AXS280Z the gearbox is mounted by a coupling. The specifications of this are described in chapter 6.2.4.
Depending on the type different gearbox types (Table 6.21) can be used with a variety of gear ratios. The gearbox is configured for
the respective application. For more information please contact our NTN-SNR application engineers.
Table 6.21 __ Gearboxes for Linear Axis AXS with rack and pinion drive and telescopic axis
Type Axis version Gearbox version Gear ratio i
AXS110TA Telescopic Axis Planetary gearbox 3…100
AXS200MP Lifting Axis Planetary gearbox 3…100
AXS200MS Lifting Axis Spur gearbox 3,83…176,88
AXS200MB Lifting Axis Bevel gearbox 4,64…131,87
AXS230MB Lifting Axis Bevel gearbox 5,20…144,79
AXS280MB Lifting Axis Bevel gearbox 7,24…192,18
AXS280P Gantry Axis Planetary gearbox 3…100
AXS460P Gantry Axis Planetary gearbox 3…100
AXS120TH Telescopic Axis Bevel gearbox 3…10
AXS120TV Telescopic Axis Bevel gearbox 3,19…54,89
AXS240TH Telescopic Axis Bevel gearbox 4,64…131,87
AXS280TH Telescopic Axis Planetary gearbox 3…100
AXS280TV Telescopic Axis Bevel gearbox 5,20…144,79
6.2.4 Adapters / Coupling cones
6.2.4.1 Linear Axis toothed belt drive
The simplest way to connect a gearbox or drive with the Linear Axis is the direct insertion of the drive shaft into the hollow shaft of the
drive pulley. The drive is screwed via a flat adapter plate with the Linear Axis. The power transmission is form-fitted by a feather key.
The only prerequisite is that the diameter of the drive shaft corresponding to the respective hollow shaft diameter of the Linear Axis. In
Table 6.22 the code numbers and dimensions for each Linear Axis are summarized and in the dimensions are shown in Figure 6.33.
Table 6.22 __ Code numbers and dimensions for form-fitted drive adaptions
1 - Design type E0 contains the delivery of a special plug-in shaft with Ød
X: Code number for special adapters
Type
Code
number
Design type e2 a s1 b2 d i2
max.
i2
max.
-l k2 a2 L2
[mm] [°] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
AXC40ZF
AXC40AF
A VC065-E0 1 54 0 4 x Ø 6,5 44 12 20,0 64,5 20,5
C B14 C40 34 45 4 x Ø 4,3 26 10 31 4,0 3,1
AXC60ZF
AXC60AF
A B14 C60 52 45 4 x Ø 5,5 40 14 47 5,0 60 5,0
B VC065-E0 1 54 0 4 x Ø 6,5 44 14 18,0 70 80 18,0
C B5 C120 100 45 4 x M6 x 8 80 14 50 8,0 100 120 8,0
AXC80ZF
AXC80AF
A B14 C80 70 45 4 x Ø 6,5 60 20 71 12,0 82 12,0
E B5 C120 100 45 4 x M6 x 12 80 20 72 12,5 120 12,5
AXC100Z
A B5 C120 100 45 4 x M6 x 12 80 25 82 17,0 103 120 12,0
B B14 C120 100 45 4 x Ø 6,5 80 25 82 17,0 100 115 12,0
C B5 C160 130 45 4 x M8 x 12 110 25 82 17,0 115 145 12,0
AXF100ZF A B5 C120 100 45 4 x M6 x 12 80 25 82 17,0 103 120 12,0
AXC120ZF
AXC120AF
A B5 C120 100 45 4 x M6 x 12 80 30 107 13,0 120 13,0
C B5 C200 165 45 4 x M10 x 20 130 30 119 25,0 200 25,0
F B5 C115 100 45 4 x Ø 11 80 25 113 7,0 120 16,0