manualshive.com logo in svg

NTI VEEMUX SM-nXm-C5AV-1000, Installation And Operation Manual

Share
Download
NTI VEEMUX SM-nXm-C5AV-1000 Installation And Operation Manual Download Page 45

NTI VEEMUX AUDIO VIDEO MATRIX SWITCH VIA CAT5 

 

40

 

Video Output Names 

 

From the Administration menu, the Output Names page can be displayed.   This page enables the Administrator to change the 
names of the output ports displayed on the Switch page.      

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                                 Figure 18- Video Output Names page 

 

To change an Output Name, enter the name of the port for the desired output port number, and press "

Save

". 

 

If you make changes and change your mind and want to return the names back to what they were before changing them,   press 
“

Reset

”.    This must be done before pressing the “

Save

” button, or changes will not be able to be reversed.  

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for VEEMUX SM-nXm-C5AV-1000






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands