NTI VEEMUX AUDIO VIDEO MATRIX SWITCH VIA CAT5
26
Autostatus
When Autostatus is enabled, any output-to-input connection change in the VEEMUX will cause an Autostatus message to be sent
via RS232 to the administrator. The format of the message would be "pc SW,OP:IP<CR>"
Example of an Autostatus message:
pc 01,01:04<CR>
which means "At the switch with unit address 01, the output (01) has changed connection to input 04."
Notes: Message to the administrator will be delayed by any RS232 traffic being received by the switch from the
administrator.
Autostatus must be disabled before using SerTest or the Matrix Switcher's Control Program (page 26).
By default, Autostatus is disabled and must be manually enabled. Autostatus is also disabled any time the power to the
VEEMUX is interrupted.
Matrix Switcher
’
s Control Program For Windows 9X, NT, 2000, XP, Vista and 7
The Matrix Switcher
’
s Control Program is an easy and powerful graphical program that controls NTI matrix switches through an
RS232 interface. The Matrix Switcher
’
s Control Program is downloaded by clicking on the link "Download Matrix Switcher
’
s
Control Program" found on the web page that appears when you insert the instruction manual CD into your CD ROM drive.
To install the Matrix Switcher
’
s Control Program after downloading
1.
Locate the Setup.exe in the directory the program was downloaded to and double-click on it
2.
Follow the instructions on the screen
The Matrix Switcher
’
s Control Program performs best on monitors set to a screen resolution of at least 800 X 600. Instruction for
using the Matrix Switcher
’
s Control Program is available by opening "MSCP Help" in the "NTI" program group once the program
has been installed and is open on the screen.
To open "MSCP Help" from the Windows desktop
1. Click on
START
2. Click on
PROGRAMS
3. Click on
NTI
4. Click on
MSCP Help
Note: While in Scan Mode, the video radio
buttons shown on the Switch page of the
Matrix Switcher
’
s Control Program may not
be in sync with the connection changes
within the VEEMUX. Connections will
change without updating the image on the
screen.
