NSR Marine NGT-200, User Manual

Page: 69 / 80

NGT-200 USER MANUAL
NGT-200 UM.E 20210520-02 66
9.2 Table of configurations and modes
Transmitter route check Measurement
Config. Band Mode
Power level
SWR Frequency Target
Fig.9.1 VHF DSC / TEST signal yes yes yes Radio st. w/DSC
Fig.9.2 VHF DSC / DISTRESS signal yes yes yes Radio st. w/DSC
Fig.9.3 VHF Telephony estimate no yes Mobile radio st.
Fig.9.4 MF/HF DSC / TEST signal yes no yes Radio st. w/DSC
Fig.9.4 MF/HF DSC / DISTRESS signal yes no yes Radio st. w/DSC
Fig.9.5 MF/HF DSC / TEST signal estimate no yes Radio st. w/DSC
Receiver route check Measurement
Config. Band Mode Output level, dBm Target
Fig.9.1 VHF DSC signals receive -63 … -130 (1) Radio stations w/DSC
Fig.9.2 VHF DSC signals receive -63 … -130 (1) Radio stations w/DSC
Fig.9.3 VHF Telephony 0 … -93 (2) Mobile radio stations
Fig.9.4 MF/HF DSC signals receive -40 … -103 (3) Radio stations w/DSC
Fig.9.5 MF/HF DSC signals receive 0 … -93 (2) Radio stations w/DSC
1 – signal level on input of DUT with attenuation in VHFPS1;
2 – signal level sent to Tester’s antenna;
3 – signal level at radio station’s input with attenuation in external attenuator (40dB).