NGT-200 USER MANUAL
NGT-200 UM.E 20210520-02
42
After the signal receipt the measured parameters
are displayed:
FIRST SCREEN:
Mes#xx
– number of the memory profile, where
the test results will be saved. To save press
F2
.
Test
– type of the signal;
TEST
signal is used
for testing purposes and is ignored by Cospas-
Sarsat system.
DISTRESS
is a real emergency
mode,
do not emit false Distress signals!
ID:A7E830C30C30CD1
– 15 HEX ID code, must
correspond to the ID code marked on the
EPIRB;
MARITIME USER
– protocol type, in this case it’s
a maritime user protocol;
MMSI
– marine identifier;
CC:413
– country code;
Beacon:0
– beacon number on the vessel;
↓
F1-Mes# F2-Save
– you can save the
measurements by pressing
F2
or go to the next
screen to check other parameters by pressing
▼
.
SECOND SCREEN:
P406: 37.0 dBm
– power level of channel
406MHz;
F406:406025.123kHz
– carrier frequencies in
channel 406MHz;
FF FE D0 53 F4 18
– full information in HEX
61 86 18 66 8F 51
format;
46 D0
Phase:+63⁰ -63⁰
– phase deviation;
UCT:160.2 ms
– unmodulated carrier time.
THIRD SCREEN:
TTT:440.0 ms
– Total Transmission Time;
F121:121500.321 Hz
– carrier frequency of
channel 121.5MHz;
P121: 4.0 dBm
– power level in channel
121.5MHz.
HH:MM dd/mm/yyyy
Mes#xx Test ok
ID:A7E830C30C30CD1
MARITIME USER
MMSI:999999
CC:413
Beacon:0
↓
F1-Mes# F2-Save
P406: 37.0 dBm
F406:406025.123kHz
FF FE D0 53 F4 18
61 86 18 66 8F 51
46 D0
Phase:+63⁰ -63⁰
UCT:160.2 ms
↓↑
F1-Mes# F2-Save
TTT:440.0 ms
F121:121500.321 Hz
P121: 4.0 dBm
↑
F1-Mes# F2-Save
