NSK Ti-Max NLX nano, Operation Manual

Page: 11 / 38

0
10. Troubleshooting
When trouble is found, check the following again before consulting NSK dealer. If none of these is applicable or the the trouble
is not remedied even after action has been taken, a failure of this product is suspected.
Check/Remedy Cause Solution
Pilot Lamp does not light. Power Switch is OFF. Turn ON the switch.
AC Adapter is not connected correctly. Check the connection.
Internal Fuse is blown, due to some reason. Contact your dealer.
Motor does not run Tubing, Motor Cord, AC Adapter is not connected
correctly. Check the connection.
Air pressure is not given, or not proper from the
delivery unit. Check the air pressure of the delivery
system.
Check the ERROR CODE in the Indicator. Refer to 9. ERROR CODE.
The rotation speed does not
rise. Air pressure is not given, or not proper from the
delivery unit. Check the air pressure of the delivery
system.
Air pressure of the delivery unit is lower than the
“Lower limit of the air pressure”. Do "6- Foot Air Calibration".
It beeps when turn on the
switch. You are stepping on the Foot Pedal when turning on
the power switch. (Safety function) Do not step the Foot Pedal, and turn on the
power switch.
LED does not light. Reached the end of life expectancy. Contact your dealer.
Motor heats up abnormally
during rotation. Coolant air is not given, or not proper from the
delivery unit. Check the air pressure of the delivery
system.
Water leakage Tubing, Motor Cord is not connected correctly. Contact your dealer.
If it is from Control Box, something is wrong within
the Control Box. Check the connection.
When turned on, the setting
values are different from
what used to be when
turned off. Turned off the motor while rotating. Turn off after the Motor has stopped.
11. Warranty
Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal
practices of installation, use and servicing. are expendable components, and are not covered by this warranty. In case the
product fails within 30 days from the date of installation, immediately report with the proof of your purchase to the dealer you
purchased from.
12. Disposing Product
Consult with dealer from whom you purchased it about waster despoil.