When the Softpatch is completed, press the Memory button #8 to store in non-volatile memory, otherwise the
patch will be lost on power-down.
To turn Softpatch off, press memory scene button #1 until the digital display shows "off" when button #1 is held
down. Then release button #1 and tap Blackout. When Softpatch is turned off, the dimmers will return to
responding "one to one" with the control channels. The softpatch previously programmed will remain in non-volatile
memory until scenes are programmed in memory page #16.
Memory Scene button #6 : MIDI dump
This button will cause a MIDI system exclusive dump of the entire memory to take place. The LED display will
show "du" after pressing this button. Set up the MIDI sequencer or other MIDI device to accept the system
exclusive data and press Memory Scene #1 to start the dump. When the LED display returns to normal the dump
is finished.
Memory Scene button #7 : MIDI
Send and Receive channel The MIDI send and receive channel assignment can be altered with this button. After
pressing this button the LED display will show "SC" for "send channel". Use Memory Scene buttons #2 and #3 to
change the send channel. Press Memory scene button #1 to change the LED display to "rC" for 1. receive
channel" and use Memory scene buttons #2 and #3 to alter this setting. Press Blackout when finished to store the
setting in non-volatile memory.
Memory Scene button #8 : MIDI reset (Full Blackout) Command
Use this button to select whether the console will cause a full reset and blackout if either Control Change #123 or
#84 is received. Use button #1 to toggle between choices.
