3
Operation
Theory
PCS-978 Transformer Relay
3-144
Date: 2013-01-16
3.15.4 Logic
Timer
t
t
Inverse for OV2 only
EN
[x.59Pn.En]
SIG
[x.59Pn.En1]
SIG
[x.59Pn.En2]
SIG
[x.59Pn.Blk]
&
SIG
[x.59Pn.U3P]
SET
[x.59Pn.U_Set]
&
[x.59Pn.St]
[x.59Pn.Op]
Figure 3.15-1 Logic diagram of residual overvoltage protection (59Pn, n=1,2)
For any stage phase overvoltage protection, if following three conditions are met, the stage
protection will be enabled.
(1) Logic setting [x.
59Pn.En] is set to “1”.
(2) Enabling inputs [x.59Pn.En1], [x.
59Pn.En2] are both set to “1”
(3) Blocking input [x.
59Pn.Blk] is set to “0”.
When the protective function block is disabled, [x.59Pn.St], [x.59Pn.Op] signals are both reset.
Default values of Inputs [x.59Pn.En1], [x.
59Pn.En2] are “1” and [x.59Pn.Blk] is “0” when those
inputs are not connected to external signals or settings.
3.15.5 Inputs and Outputs
59P
U3P
En1
En2
Blk
St
Op
Figure 3.15-2 Function block 59G (Each stage)
Table 3.15-2 Input signals of function block 59G (Each stage)
No.
Signal
Description
1
U3P
Three phase voltage data, including calculated residual voltage.
2
En1
Function enabling input1 and input 2, it can be binary inputs or settings, such as function
enabling binary inputs, logic links, etc.
3
En2
4
Blk
Function blocking input, such as function blocking binary input.
If the input is 1, the protection is not reset and time delay will be cleared.
Summary of Contents for PCS-978
