-
81
-
REASSEMBLY OF THE HAMMER
17.7 Install the swivel flange (EE).
a. Apply grease (
28
) to the o-rings (RR)
and the back up rings (SS), then
install them on the swivel flange (EE).
Install the swivel flange on the valve
body.
b. Tighten the bolts to the specified
torque, see page 106.
c. Apply grease to the o-rings and the
back up rings. Install them in the
swivel elbow (DD). Install the seal
rings (AI), the swivel elbow (DD), and
stop ring (AH) on the swivel flange.
d. Using snap ring pliers, install the snap
ring (AJ) on the swivel flange (EE).
The JIC fitting on the swivel
adapter is off set to clear the
swivel flange bolts.