Noyes OFL-200, User Manual

Page: 12 / 57

4
link being tested. Fiber Rings and Fiber Boxes with a variety of lengths and connector styles are
available from Noyes.
Optical ports must be kept free from dirt or other contaminates to ensure accurate measurements
and operation.
For cleaning connector end faces on OFL 200 OTDRs, test jumpers, and in fi ber frames or
adapters, Noyes recommends using our exclusive FCC2 non-hazardous cleaning fl uid and CCT
molded cleaning tips.
The FCC2 fl uid is a non-fl ammable, environmentally safe, residue free solvent engineered to clean
fi ber connector end-faces.
The CCT molded cleaning tips introduce a new fi ber connector end face cleaning technology.
Rather than a fabric-covered or foam-covered stick, we are offering a molded cleaning tip that
will trap contamination and wick cleaning solvents from bulkhead connectors. This new cleaning
tip is a molded, sintered polymer that is both porous and pliable conforming to virtually any fi ber
end-face polish geometry while trapping and absorbing contaminants.
CCT cleaning tips and FCC2 cleaning fl uid may be combined into FCP1 fi ber optic cleaning kits.
Noyes offers a complete selection of FCP1 cleaning kits for fi eld cleaning. The FCP1 Series of
kits delivers compact, safe, easy to use, reliable cleaning for all types of fi ber optic connector
end faces. Visit our web at
www.AFLtele.com (select Products, then Cleaning Supplies)
for more information.
Alternatively, a supply of optical cleaning wipes and IPA (Reagent Grade Isopropyl Alcohol 99%
or better) and a can of fi ltered compressed air may be used for cleaning.