NVR-3304POE, NVR-3308POE, NVR-3408POE-H2, NVR-3416
User’s manual ver.1.1.1
All rights reserved © AAT Holding S. A.
63
5.9. NVR abnormity alarms
NVR support system error reporting. To configure alarm choose ABNORMITY icon from
SYSTEM menu.
The following fields allow to configure abnormity alarms :
ABNORMITY TYPE - check the checkbox and choose the error type :
- HDD Low space - NVR will generate error if free space on hard drive will be less than
percentage set margin
- HDD NOT EXITS - NVR generates an error if it does not detect the hard disk for recording
- HDD ERROR - NVR generates an error if it detects an error on the hard drive
- NETOWRK CONNECTION BROKEN - NVR generates error if network is not connected
- IP CONFLICT - NVR generates an error in the case of IP address conflict with another device
- NET CHANNEL DISCONNECT - NVR generates an error in the absence of a connection to
the network channel.
After generating error NVR can perform the following actions:
ALARM OUT - activates alarm out for desired time (only in NVR-3408POE-H2 and NVR-3416)
LIKAGE RECORD - triggers recording for selected time (10
–
300 seconds) and channel
SNAPSHOT - saving captured jpg file into FTP server (function will be available in the feature)
PTZ LINKAGE - invoke preset, tour or pattern for PTZ devices
TOUR - displays sequence of selected cameras after alarm
SEND EMAIL - sends Email after detecting alarm
NVR MENU
