NVR-3304POE, NVR-3308POE, NVR-3408POE-H2, NVR-3416
User’s manual ver.1.1.1
All rights reserved © AAT Holding S. A.
15
2.4. Connecting monitor
This product supports following interfaces for main monitor: HDMI, VGA and BNC.
For HDMI and VGA outputs following resolutions are supported: 1024x768, 1280x1024, 1280x720,
1920x1080.
After changing resolution you have to confirm it by clicking OK
.
NVR will be restarted in order to
change the resolution.
You can use the HDMI <> DVI converter to connect to the DVI monitor. HDMI<>DVI converter is
not included and you can buy it separately.
2.5. Camera and Network wiring
NVRs have built-in 4 or 8 PoE ports RJ-45 with PoE support which can be used for connecting
cameras. Plan your network configuration to avoid overloading the network. If you use a switch to
cameras connectivity it is recommended not to exceed 60% of the maximum capacity of the network
interface. When connecting more than 6 cameras via a switch we recommend you to use a 1000 Mbit
switch connected to 1000 Mbit NVR interface.
Note : PoE interfaces must be in a different IP subnet than 1000 Mbit interface. More about
connecting cameras and proper IP configuration is in 3.5.2 chapter of this manual. Please notice that
the Ethernet connection is effective within 100 meter distance.
STARTING THE DEVICE
IP CAMERAS
INTERNET
PC COMPUTER
ETHERNET
SWITCH
IP CAMERAS
5 to 8 for NVR-3408
100 Mbit PoE Lan
1000 Mbit Lan
1
2
3
4
