NVR-3304POE, NVR-3308POE, NVR-3408POE-H2, NVR-3416
User’s manual ver.1.1.1
All rights reserved © AAT Holding S. A.
46
5.5.1. Net Apps
Click on the NET APPPS tab to open settings for configuring network services.
5.5.2. PPPOE
Settings for PPPoE (Point-to-Point Protocol over Ethernet) allow you to connect the NVR to the
network useing PPPoE protocol. Check the ENABLE field to activate the support for PPPoE protocol
enter the username, password and IP address provided by your ISP.
5.5.3. 3G
This tab allow to configure internet connection using USB modems. This function will be available in
feature.
5.5.4. NTP
NTP function allows to connect to network time server using NTP protocol. Fill the following fileds
to configure service.
SERVER IP - NTP server IP
PORT - port used for communicating with server (default 123)
UPDATE PERIOD - time at which the service will update the time setting
Check ENABLE checkbox to make settings active and press OK or APP to save setting.
5.5.5. FTP
FTP settings tab allows NVR to save the records on FTP server. Following parameters are available
for connecting to FTP sever.
TYPE :
- RECORD FTP - configuration for saving recording on FTP server
- IMAGE FTP - configuration for sending jpg images from video stream into FTP server. (function
will be available in the future)
SERVER IP - server IP adress
ALTERNATE IP - function unavailable
PORT - port number for FTP service ( default 21)
USER NAME - user name for connecting to FTP service
PASSWORD - password used for usernames in FTP service
ANONYMOUS - use anonymous password for FTP login
NVR MENU
