NVIP-TDN2401D/IR/MPX1.0, - user’s Manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
32
CAMERA WWW INTERFACE
Record file - selects type of file that will be saved as a result of alarm
Avi
- video recording (with sound, when active) whose length is a
sum of pre and post alarm recording durations
JPEG sequence
- sequence of pictures whose length is a sum of pre and post
alarm (available for MJPEG compression)
JPEG file
- single picture
Record time setting - time of pre and post alarm
Pre alarm
- from 0 to 5 second
Post alarm
- from 0 to 5 second
Network Disconnected
- backup video recording mode in case of physical network connection
loss (disconnecting cable from the Ethernet).
IP check
- allows to check the connection between camera and a desired
address. Lack of connection displays an appropriate message in the log,
camera may be also switched to alarm recording mode:
IP Address - network address or domain name used for checking,
Interval
- time between two consecutive address checks.
Information:
Due to the limited efficiency of cameras it is not recommended to record streams bigger than 1Mbps.
When there is too much information or video quality is too high, post alarm recording time
is decreased and frames may be lost.