NVIP-TDN2401D/IR/MPX1.0, - user’s Manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
20
CAMERA WWW INTERFACE
c. System update -
tab for upgrading firmware, save, restore and set default camera setting.
Firmware upgrade
- function allows to upgrade camera firmware.
To update the firmware online, click
BROWSE
button and select new f/w file with „bin” extension.
Then click
UPGRADE
and confirm
OK
to the proceed.
Caution: Please contact your local distributor before software upgrading.
Caution: You should close all other programs and run only one camera in Internet Explorer
browser. Power failure or turning off the device while upgrading the software results
in camera damage and necessity for service repair
.
Reboot system
- after pushing
START
button camera restarts
Factory default
- after pushing
START
button all default settings are restored
(camera IP
address is not changed, user’s settings are changed to default)
Setting management
- user may download the current settings to PC, or upgrade from previous
using saved settings.
