NVIP-TDN2401D/IR/MPX1.0, - user’s Manual ver.1.0.
All rights reserved © AAT Holding sp. z o.o.
10
2.2.
NVIP-TDN2401D/IR/MPX1.0 camera mounting
Prior to installation please familiarize yourself with the product, its parameters and installation process:
Gently remove the camera dome counter-
clockwise, twisting it until 3 latches placed every 120˚
around the edge are released (distinctive unlocking “click” can be heard).
Please remove camera base in a similar manner.
Place guide pattern in a desired place and use to drill holes for screws and cables.
Screw the camera base onto desired surface using included screws.
Connect the camera network switch using Ethernet cable
Connect power supply cable to power socket.
Mount the camera twisting it gently clockwise onto the base. Please ensure that 3 latches match
undercuts in the base (distinctive locking “click” can be heard meaning that camera is firmly
attached to the base).
Adjust the position of the camera module.
Unscrew the blocking knobs and adjust focal length and focus.
Mount camera dome twisting it gently clockwise onto the camera in similar way as mounting the
camera to its base.
2.3. Starting the IP camera
To start NOVUS IP camera you have to connect the camera to a network switch using Ethernet cable
and power it directly from the power supply.
After connecting power supply green LED should light up. Initialization process lasting about 30
seconds takes place then. Next, you can proceed to establishing a connection with the camera via a web
browser.
If the connection is successfully established green LED blinks with a frequency proportional to the
quantity of data sent. Connecting via web browser is then possible. If
connection isn’t established (the
network cable is disconnected) green LEDs isn't active, solid light means that network connection is ok
but camera doesn't receive or send any data, with possible PC network settings error.
START-UP AND INITIAL CAMERA CONFIGURATION
