NVIP-2DN7120SD-2P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
10
6. Install the Camera on the fixed Hard Ceiling Mount by turning the Camera clockwise.
7. Fasten the screw at the tip of the Fixing Plate to attach the Camera to the Hard Ceiling Mount.
8. Remove the bubble by pulling down the side on which the locking pin is not placed.
9. Remove the camera module protective elements in the form of tapes, sponge and lens cap.
10. Mount the camera bubble by
pressing in a manner analogous to
the dismantling and unscrewing of
blocking screws 1 and 2 (unscrew
the screws until you feel light
resistance) and screwing the screw
3.
START-UP AND INITIAL CAMERA CONFIGURATION
Ś
ruba M3 - gwiazdkowa
lub Torx wraz z dwiema
podkładkami
