NVIP-2DN7120SD-2P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
21
ELECTRIC CONNECTORS AND ACCESORIES
•
Turn the camera on
•
Check the SD card by checking its capacity in the STORAGE MANAGEMENT tab.
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
•
software (web browser level) resetting the camera settings
•
hardware (using reset) restores factory defaults.
6.1. Restoring software factory defaults
Factory software default restores default settings of the IP camera except network settings (optional).
The camera re-starts then, taking about one minute to complete. Option to restore the factory default is
described in SETUP>FACTORY DEFAULT tab.
6.2. Restoring hardware factory defaults in IP cameras
Factory hardware default restores default settings of the IP camera. In order to restore factory defaults
for the camera please follow the instructions:
•
press the RESET button and hold on for 10 seconds
•
release button
•
log on after approx. 1 minute using default IP address (http://192.168.1.200) and default user name
(root) and password (pass)
In the NVIP-2DN7120SD-2P camera RESET button is located as depicted above.
RESET
