All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
NVIP
-
2ATM
-
6501/F
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
START
-
UP AND INITIAL IP CAMERA CONFIGURATION
2. START
-
UP AND INITIAL IP CAMERA CONFIGURATION
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2.1 Description of connectors and camera equipment
2.2 Power supply connection
The power adapter is not included with the camera, so the user is obliged to provide it himself.
The power supply should meet the following conditions:
•
Direct current (DC) power supply with 12V output voltage
•
Connector polarity according to the following diagram
CAUTION!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service re-
pairs.
12 VDC +
GND
3
4
2
1
1. 100 Mb/s Ethernet port
2. RS 485
3. Power supply 12VDC
4. Reset button
5. Microphone
5
