All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
NVIP
-
2ATM
-
6501/F
Quick start guide
version 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
2.5. Starting the IP camera
To run NOVUS IP camera you have to connect ethernet cable between camera and switch or computer.
You can power it from 12VDC power supply compatible with camera power supply specification.
The recommended way to start an IP camera and perform its configuration is a direct connection to
the
network switch which is not connected to other devices. To obtain further information about network
configuration parameters (IP address, gateway, network mask, etc.) please contact your network
administrator.
•
Connection using external power supply and network switch
•
Connection using external power supply directly to the computer
START
-
UP AND INITIAL CAMERA CONFIGURATION
IP Camera
Network transmission
Network Switch
Computer
Network transmission
IP Camera
Network transmission
-
cross over cable
Computer
