NVAHD-2DN3202MV/IR-1-II - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
7
INSTALLATION
3.2. Camera mounting
To mount a camera please follow the instructions below:
Remove the decorative ring (
A
) by turning it counter-clockwise
Remove the camera cover (
B
), remove the camera from the base
Put the bracket or mounting template to the wall in a desired mounting place (with cable hole).
Taking the bracket
’
s base screw holes as a pattern, mark future drilling holes for screws.
Drill holes in accordance with previously done markings and base hole placement.
Mount the camera base using the supplied plugs and screws.
Connect the camera cables, put camera on the base, attach the cover (
B
)
Adjust camera position, set appropriate field of view and focus
Install the decorative ring (
A
) by turning it clockwise.
Make adjustments to the camera using the on-screen menu
WARNING!
Please note that the wall or ceiling must have enough strength to support the Camera.
WARNING!
When installing the bracket on rough/uneven surfaces, please additionally seal the junction with
appropriate sealing mass. Please pay special attention to any mounting holes and if they are a loop-
through ones, seal them too.
WARNING!
The declared degree of protection of the camera relates to its housing and does not take into account
the possibility of moisture infiltration into the interior of the camera by connecting cables.
Connection cables protection through i.e. sealing up is the responsibility of the camera installer. The
manufacturer is not liable for any damages to the camera caused as a result of failing in performing
that activity by installer, which also means that camera damaged in that way is not subject to
warranty repairs.
Focus
Zoom
A
B
