NVAHD-2DN3202MV/IR-1-II - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
15
SETTINGS
4.1.8 ADJUST submenu
It allows to perform additional image adjustment. Giving the
ENTER
command in this mode displays
the following menu:
SHARPNESS
-
allows to disable (
OFF
) and enable (
AUTO
) sharpness correction function. After
selecting
AUTO
and giving the
ENTER
command , next submenu is displayed, where it is possible
to set the degree of correction and gain ranges for compensation
MONITOR
- corrects the image parameters depending on chosen monitor (LCD monitor or CRT
monitor). After giving the
ENTER
command, the submenu is displayed where fine adjustments can
be made.
LSC
- enables and disables the vignetting correction function.
VIDEO OUT
- chooses a system in which the camera works (PAL or NTSC).
4.1.9 Camera Setup Menu HIDDEN
Camera has another hidden menu which can be entered by executing sequence: hover over the
EXPOSURE
menu, three times click
RIGHT
,
and then give an
ENTER
command.
MONITOR OUT
- selecting modes of camera. Available settings: AHD, CHD, THD and CVBS
ADC TEST
- option that displays data from ADC converter for testing purposes.
FIRMWARE
- the current version of the camera firmware.
RETURN
- return to the previous menu.
