NVAHD-2DN3202MV/IR-1-II - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
13
SETTINGS
After selecting
ON
and using
ENTER
command adjust motion detection settings is displayed, as
shown below:
SELECT
- selects the number of the area for further settings.
DISPLAY
- turns on/off particular area. Also allows to set the position and size of the area.
SENSITIVITY
- refers to sensitivity
COLOR
- sets the color visualization of motion in a particular area
TRANS
- allows to set the transparency level of visualization
ALARM
- displays submenu where user can set motion visualization mode (
OFF
,
BLOCK
,
OUTLINE
,
ALL
), enable or disable displaying
„
MOTION DETECTED
”
information and set its
display time (1 ~ 15 s). Options
ALARM OUT
and
ALARM SIG
are inactive.
DEFAULT
- restores default settings.
PRIVACY
- allows to enable (by selecting
ON
) privacy zones. Part of the screen may be masked using
four rectangular zones. Selecting
ON
and giving
ENTER
command displays a sub-menu, containing
four masks positions.
SELECT
- selects the number of the area for further settings.
DISPLAY
- turns on/off particular area. Available masking methods: with overlaid color, color
reversal or tessellation (
COLOR, INV, MOSAIC
). Giving
ENTER
command after selecting
COLOR
,
INV
or
MOSAIC
option will open a new submenu which allows to set the position and size of the
zone.
COLOR
- sets the color masking (available only if
COLOR
option was chosen).
TRANS
- allows you to set the degree of transparency mask (available only if
COLOR
option was
chosen).
DEFAULT
- restores default settings.
