EN
3
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
4. INSTALLATION
4.A. Important warnings
The contents of this manual must be read completely before assembly. For the safe assembly and use of the door,
we recommend that you follow the instructions in this manual carefully. After completing the assembly and
checking the installed product, the user will be informed about the methods of use and the risks associated with
the use of the door.
Assembly, electrical connections and regulations must be carried out by qualified personnel in compliance with
the standards in force and according to the instructions given.
Work on the industrial door should only be carried out when the door is not in operation.
The components are made of high quality, sustainable and durable materials. However, during installation all
necessary precautions must be taken to avoid damage.
Defective parts must always be replaced with original parts, otherwise the safe and proper functioning of the door
cannot be guaranteed and there is a risk that the warranty will be invalidated.
The software of the programmable control panel must not be modified. Only the supplier will be able to modify or
add anything to the product.
The motor must be used exclusively for the purpose for which it was designed. Any other use should be considered
inappropriate and therefore dangerous.
The safety devices (photocells, light curtain, etc.) must be installed in compliance with the standards in force, as
well as the installation environment, the operation of the system, and the force exerted by the door. Safety devices
must protect the entire area of the door’s trajectory in order to prevent entrapment or shearing.
The electrical installation establishes the execution and commissioning of the electrical installations, which must
only be carried out by authorised installers, in accordance with local and/or national regulations, and the
appropriate technical documentation must be provided.
If in doubt, request assistance from qualified personnel.
After the installation is completed, the correct operation of the door will be verified by filling in the corresponding
register that certifies such verifications.
For any information or interpretation regarding that set out in this manual, do not hesitate to contact the technical
support service:
Novoferm Nederland BV
088-8888112
www.novoferm.nl
ATTENTION:
• During installation there is a risk that components will fall, which may cause injury to persons or
damage to objects.
• There is a risk of electrocution if there is contact with the mains voltage. Make sure that the electrical
installation on the client‘s premises meets the applicable safety requirements.
• During all work on the doors, make sure that the power is not connected and protect it against
unauthorised use.
• Only carry out welding and grinding work when this is expressly permitted. Be careful, since there may
be a risk of fire or explosion. Ensure that there is sufficient ventilation for welding or grinding, as dust
and other flammable substances may pose a risk of explosion.
