EN
8
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
• Make sure that the floor on which the pre-assembly is to be carried out is smooth and has the right
dimensions for the door to be placed horizontally. Check that the floor where the door is to be assembled is
level and clean.
• Check whether the building materials of the opening in which the door is to be installed are concrete/brick or
metal. This information will determine the system for fixing the door to the opening. In both cases the
mooring points will be defined by the mooring holes previously drilled in the guides.
• Avoid installing the door in places where its use and duration are incompatible with the materials used to
manufacture it. (e.g. Strongly corrosive environment). If in doubt, please contact Novoferm.
• The installation of the door while children are present, or in any case while in the presence of persons not
related to the assembly work, is forbidden. We recommend that the assembly be carried out by qualified
installers.
Before connecting the motor, check that:
• The data on the motor plate is compatible with the mains data.
• The product is connected to an efficient earthing system.
• A differential switch has been installed on the panel that controls the motor.
• Apply the signs provided for by current regulations to identify hazardous areas.
• Before connecting the power supply, check that the installed power is greater than that required by the au-
tomated system.
• Carry out the earthing according to the safety regulations in force.
• The installer must inform the user about the automatic and manual emergency operation of the door and
give him/her the instructions for use.
• The manufacturer cannot be held responsible for any damage caused as a result of failure to comply with
these rules.
ATTENTION:
The company is not responsible for the installation not being earthed or the lack of
differential switch.
