EN
7
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
L
4.E.2. Initial checks
The following aspects should be checked before assembly:
• Check that the door has not been damaged in any way that could compromise its installation or operational
safety. The aim is to check that all the packaging material is intact.
• Verify that the material received matches that detailed in section 4.B of this document, counting and checking
it item by item.
• Check that the information given in the assembly order is correct, primarily:
• Check that the dimensions of the opening, width and diagonal measurements, are exact and conform to the
dimensions of the door.
L=
width of the opening
H =
height of the opening
h =
lintel height =
500 mm
D =
diagonal
SX =
left side clearance
(standard motor side) =
310 mm
DX =
right lateral space =
110 mm
A =
Lintel width =
320 mm
No.
Item
No.
Item
No.
Item
01
Right lateral frame
with plastic guide
07
Canvas with side zippers
13
Motor support
02
Left lateral frame
with plastic guide
08
Control panel
14
Mounting bracket
03
Pulley
09
Upper spacer
15
Key
04
Flag
10
Brush
16
Roll cover
05
Bearings
11
Photocell
17
Motor cover
06
Motor
12
Light curtain
18
Right side cover
Figure 2 - Required right-left lateral space and lintel of the opening
H
+h
H
SX
DX
L
DX
+L+
SX
h
A
