Novexx Rewinder 2000 Service Manual Download Page 8

06/15 Rev. 6.01-01 

USER + SERVICE MANUAL 

/Using the Documentation 

 All 

devices  

7

Printing the documentation 

 

In order to make the documentation readable without a PC, the documents 
can be printed in A4 as well as in Letter format. For printing, the Acrobat 
Reader uses the print capabilities of the platform it is run on. The layout of 
the printed documents equals the appearance on the monitor screen. 

 

Mind the following hints before you start to print: 

 

When printing several manuals, it is not necessary to print out all topic 
sections starting with the title page. 

 

–  Only print out the topic sections marked in black once. These topic 

sections are referenced from different Manuals. Physically, they consist 
of the same data. 

 

–  Always print out all subjects marked in purple. Reference is only made 

once in the respective manual to each purple topic section. 

 

When printing all of only one manual, it is necessary to print out all topic 
sections in this manual starting from the title page. 

Example

 

  In order to print a 

user manual

, proceed as follows: 

 

1.  Print the title page. 

 

2.  Click the topic sections on the right half of the title page one after the other. 

Print each topic section completely. 

 

  In order to print the 

service manual

 additionally, switch to the title page of  

the service manual and only click the topic sections written in purple. Print 
those topic sections. The remaining black topic sections are already printed 
with the user manual. 

Text integration

 

It is also possible to integrate documentation text (and images) in other 
documents using the Windows clipboard. As a result, e. g. order 
information (spare part designations and part numbers) can be used simply 
and with no additional effort. 

 

  Pay attention to copyright restrictions. Information on this subject can be 

found under "Copyright". 

Summary of Contents for Rewinder 2000




























































Reviews: