02/17 Rev. 02
SERVICE MANUAL
Attachment, Setup, Service
Rewinder
2000
15
Adjusting the sensor
The dancer arm controls the winding speed of the rewinder by means of a
sensor. Bevor applying the rewinder for the first time, the dancer arm has to
be brought in both end positions to adjust the sensor.
[6] „Loose“ position (A) and „Middle“ position (B) of the dancer arm.
Prerequisite: Dancer arm is in loose position (A).
Action
Display
Note
1. Call
SERVICE FUNCTION >
Rewinder adjust.
Rewinder adjust
2. Press the online button
Rewinder adjust
loose xxx
xxx = actual value
supplied by the sensor;
moving the dancer arm
alters the value
3. Press the cut button.
Rewinder adjust
middle xx
4. Move the dancer arm into
the middle positon (B) and
hold it there. Press the
online button.
Rewinder adjust
In the middle position,
the deflection roller of
the dancer arm should
be placed below the
axle of the rewinder.
5. Restart the printer.
A
B
