Operating manual
LTSA LTMA
SYSTEM REQUIREMENTS XLP 514 MIT LTMA
The XLP 514 must be equipped not only with the necessary firmware version, but also with a few
special parts in order to be able to be operated together with a LTMA. This “XLP 514 for LTMA” can be
ordered ready for operation or retrofitted.
Necessary firmware version
MAR-V3.0
Necessary parts
The following parts must be available for operation of a XLP 514 with LTMA:
Item
Name
A
Applicator LTMA
B
Enclosure part
C
Dispensing edge
D
Sub-D cable harness
E
Internal rewinder
F
BLDC output stage
G
Stepper motor output stage
Fig. 7: The parts marked in colour are required for operation of a XLP 514 with LTMA (blue = included in retrofit kit LTMA).
Edition 02 - 7/2021
13
Product description
System requirements XLP 514 mit LTMA
