Operating manual
LTSA LTMA
Retrofit/conversion kits for the XLP 504
(Output) printer
Rewinder
retrofit kit
Conversion
kit LTSA
Remaining parts
XLP 504 “Basic”
N100522
Enclosure part
XLP 504 “Peripheral”
N100524
M4A output stage, wiring
harness, enclosure part
XLP 504 “Basic” with rewinder
--
Enclosure part
XLP 504 “Peripheral” with rewinder
--
M4A output stage, wiring
harness, enclosure part
XLP 504 “Basic” with rewinder &
dispenser
--
Dispensing edge, enclosure part
XLP 504 “Peripheral” with rewinder
& dispenser
--
N101196
M4A output stage, wiring
harness, dispensing edge,
enclosure part
The most economical solution is to retrofit a “XLP 504 basic” or “XLP 504 basic with rewinder”, as
then less parts are left over after retrofitting.
1
ATTENTION! - If both kits are retrofitted, install the cable harness from the “conversion kit LTSA” directly!
Edition 02 - 7/2021
12
Product description
System requirements XLP 504 with LTSA
