Operating manual
LTSA LTMA
Operation / Malfunctions / Cleaning
OPERATION
The LTSA/ LTMA is ready for operation when it has been installed, connected and activated. The label
dispensing process can be started from one of the following sources as soon as a print job has been
transmitted and interpreted:
• Press a button on the printer operation panel
• Easy Plug immediate command (#!D) at the data interface
• Press an
optional
foot switch (connected to the printer)
• External start signal received via the
optional
signal interface (e.g. from a product sensor)
Manual starting signal by pressing a button
1.
Switch to the “Home” display.
2.
Press the button under the symbol
.
A label from the print job is printed, dispensed and applied.
Alternatively, a start signal can be given by pressing the optional foot switch.
The last label of a print job can only be triggered by a start signal, not by pressing the apply button
at the operating panel.
Automatic start signal at the signal interface
When a start signal from an external signal source is received at the signal input of the optional I/O
board, a label from the print job is printed, dispensed and applied.
EXPERTS
For further details of the connection configuration, refer to ...
• XLP 50x Service manual, chapter “Service Electronics” > “I/O board” > “Signal interface” >
“Wiring of signal inputs”
• XLP 51x Service manual, chapter “Electronics Description” > “Boards” > “BasicIO”
Edition 02 - 7/2021
27
Operation / Malfunctions / Cleaning
Operation
