04/13 Rev. 1.12-03
USER / SERVICE MANUAL
Mounting/Setup
LA-TO / LA-TO XL
Product description
4
Technical data
Difference LA -TO to
LA -TO XL
The table shows the differences between LA -TO and LA -TO XL:
Label material
Capacity
Application
Connectors
Specification
LA -TO
LA -TO XL
Stroke length
180 mm
380 mm
Product speed during
application
max. 15 m/min
keine
Air consumption per
stroke
0.3 l
0.6 l
Size in mm
at ALS: 240x420x260
at ALX: 260x410x260
at ALS: 240x620x260
at ALX: 260x610x260
Weight
approx. 5 kg
approx. 6 kg
Type
Self-adhesive (paper, plastic materials)
a
a) As a result of static charge and friction effects, plastic materials may tend to crease during the dispen-
sation step. Therefore, plastic materials must be tested under application conditions before being used
in production.
Material width
•
LA -TO: 30 -125 mm
•
LA -TO XL: 30-160 mm
Material length
•
LA -TO: 30-125 mm
•
LA -TO XL: 30-210 mm
LA-TO / LA-TO XL to ALS 20x/256/30x
max. 100 labels/min
a
a) Depends on: application time, stroke length, label size, label material
LA-TO / LA-TO XL to ALX 92x
max. 80 labels/min
b
b) Depends on: application time, stroke length, label size, label material and printing rate
Stroke length
•
LA -TO: 180 mm
•
LA -TO XL: 380 mm
Net distance, with sensor for end and home
positions
Application direction
From top, sideways or from bottom
Tolerance for label position
±1 mm
Application angle
90°
Product speed during application
step
•
LA -TO: max. 15 m/min
•
LA -TO XL: 0 m/min
Air stream
Suction nozzle
Power supply
Standard signal interface
(ALS 20x/256/30x, ALX 73x)
Applicator interface
a
(
ALS 20x/256/30x, ALX 92x, ALX 73x)
Supply current
max. 0.5 A
Supply voltage
24 VDC
Supply air pressure
6 bar
b
