Novell PLATESPIN ORCHESTRATE 2.0.2, Installation And Configuration Manual, Page: 78 / 132

78 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
The following steps explain how to install the Development Client and other Orchestrate Clients
from the web hosted Administrator information page.
1
On the computer where the Orchestrate Development Client is to be installed, launch the
PlateSpin Orchestrate Administrator Information page. For information about how to do this,
see
Section 2.3.2, “Installing the Orchestrate Agent from the Administrator Information Page,”
on page 60 .
2 Scroll to the Installation section of the page:
3 In the PlateSpin Orchestrate Clients section, download:
Š
novell-zenworks-zos-clients-2.0.2-57039.i586.rpm
Š
The Java 1.5.0 (32-bit) or Java 1.5.0 (64-bit) RPM
4 Install the Java 1.5.0 RPM by entering the one of the following commands (as applicable):
rpm -ivh novell-zenworks-zos-java-1.5.0_sun_update17-0.x86_64.rpm
or
rpm -ivh novell-zenworks-zos-java-1.5.0_sun_update17-0.i586.rpm
5 Install the Orchestrate Development Client by entering the following command:
rpm -ivh novell-zenworks-zos-clients-2.0.2-57039.i586.rpm
6 Start the Development Client by entering the following command in
/opt/novell/
zenworks/zos/clients/bin
:
.
/zoc
7 Select the Orchestrate Server grid object you want to log onto, then enter the username and
password for that server to connect to it.
2.4.4 Using the ISO to Install the Orchestrate Client on SLES 10
Machines
Use the following procedure if you want to use the Add-on CD method to install just the Orchestrate
Agent or the Orchestrate Clients to a SLES machine.
IMPORTANT: The Orchestrate Clients are not supported on SLES 9 SP3.
1 To verify that the device where you want to install the agent and client software fulfills the
necessary requirements, review
Chapter 1, “Planning the Orchestrate Server Installation,” on
page 9 .
2 Download the appropriate PlateSpin Orchestrate Server ISO (32-bit or 64-bit) to an accessible
network location.
3 (Optional) Create a DVD ISO (32-bit or 64-bit) that you can take with you to the machine
where you want to install it.
4 Install PlateSpin Orchestrate Client software:
4a Log in to the target SLES server as
root
, then open YaST2.
4b In the YaST Control Center, click Software , then click Add-on Product to display the Add-
on Product Media dialog box.