Novell PLATESPIN ORCHESTRATE 2.0.2, Installation And Configuration Manual, Page: 22 / 132

22 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
The VM Builder cannot be installed on a VM and must only be installed on the host operating
system of the VM Builder node. Multiple servers with VM host capability can be used as VM
Builder machines to make the VM Builder group.
This section includes the following information:
Š
Section 2.2.1, “Installation and Configuration Steps,” on page 22
Š
Section 2.2.2, “PlateSpin Orchestrate Configuration Information,” on page 30
Š
Section 2.2.3, “Correcting Configuration Errors and Repeating the Configuration Process,” on
page 35
Š Section 2.2.4, “Installing and Configuring the Orchestrate Server for Use with a PostgreSQL
Audit Database on a Different Host,” on page 35
Š
Section 2.2.5, “Installing and Configuring the Orchestrate Server for Use with a Local
PostgreSQL Audit Database,” on page 40
Š
Section 2.2.6, “Configuring the Audit Database After PlateSpin Orchestrate Is Configured,” on
page 43
Š
Section 2.2.7, “Configuring the Remote Audit Database after PlateSpin Orchestrate Is
Configured,” on page 44
Š Section 2.2.8, “Modifying Audit Database Tables to Accommodate Long Names,” on page 44
2.2.1 Installation and Configuration Steps
To install and configure a complete PlateSpin Orchestrate system (except the VM Client) on a SLES
machine:
1 Review Chapter 1, “Planning the Orchestrate Server Installation,” on page 9 to verify that the
device where you want to install the Orchestrate Server software fulfills the necessary
requirements.
2 Download the appropriate PlateSpin Orchestrate Server ISO (32-bit or 64-bit) to an accessible
network location.
3 (Optional) Create a DVD ISO (32-bit or 64-bit) that you can take with you to the machine
where you want to install it.
4 Install PlateSpin Orchestrate software:
4a Log in to the target SLES 10 SP2 server as
root
, then open YaST2.
4b In the YaST Control Center, click Software , then click Add-on Product to display the Add-
on Product Media dialog box.
4c In the Add-on Product Media dialog box, select the ISO media ( Local Directory or DVD )
to install.
4c1 (Conditional) Select DVD , click Next , insert the DVD, then click Continue .
4c2 (Conditional) Select Local Directory , click Next , select the ISO Image check box,
browse to ISO on the file system, then click OK .
4d Read and accept the license agreement, then click Next to display YaST2.
4e In YaST2, click the Filter drop-down menu, then select Patterns to display the install
patterns available on the PlateSpin Orchestrate ISO.