Novell PLATESPIN ORCHESTRATE 2.0.2, Installation And Configuration Manual, Page: 118 / 132

118 PlateSpin Orchestrate 2.0 Installation and Configuration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
3.8 Walkthrough: Looking at the Job After It Has
Run
After you have run the job, there are several ways to verify that it has run. This section explains
those methods.
Š
Section 3.8.1, “Verification at the Command Line,” on page 118
Š Section 3.8.2, “Verification at the Jobs Monitor,” on page 119
Š
Section 3.8.3, “Verification at the Server Portal,” on page 120
3.8.1 Verification at the Command Line
The following sections explain some of the
zos
commands that you can use to verify that a job has
run and monitor some of the results of the job:
Š
“zos jobs” on page 118
Š
“zos jobinfo job_name” on page 118
Š
“zos status --detail” on page 118
Š
“zos log job_id --verbose” on page 119
zos jobs
You can use the
zos jobs
command to list all of the jobs that have run while you have been logged
in as a user. Running this command yields an output like this:
Job JobID User Started Elapsed State
whoami userA.whoami.60 userA 12/24/2008 02:35:38 0:00:00
Completed
zos jobinfo job_name
You can use the
zos jobinfo -e job_name
command to display information for a named job the
last time it was run. Running this command yields an output like this:
Jobname/Parameters Attributes
------------------ ----------
whoami Desc: This is a demo example of enhanced exec
numJoblets Desc: The number of joblets to schedule
Type: Integer
Default: 1
resource Desc: The resource id to run on
Type: String
Default: .*
zos status --detail
You can use the
zos status --detail
command to display the status of the most recently run job.
Running this command yields an output like this: