54
PlateSpin Orchestrate 2.0 Installation and Configuration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
4f
Select the PlateSpin Orchestrate installation patterns that you want to install:
Orchestrate Agent:
Runs applications on all managed nodes under the management
of the Orchestrate Server. An agent reports its status to the Orchestrate Server.
Includes packages to help you configure the Orchestrate Agent.
Virtual Machine Builder:
Installs software on the individual nodes where
customers want the VMs to be created from the VM Client.
Monitoring Agent:
This pattern installs the Ganglia Agent (gmond) on each
monitored node, which collects performance metrics and sends the data to the
Orchestrate Monitoring Server. This pattern includes packages that help you
configure the Monitoring Agent.
If you select the Orchestrate Agent pattern, the Monitoring Agent pattern is selected
by default. This is only a recommended dependence (most users install both
components together) and is not binding. The autoselection is made for your
convenience.
For more information about gmond, see “
Understanding Resource Metrics Facts
” in
the
PlateSpin Orchestrate 2.0 Developer Guide and Reference
.
Refer to the information in
Appendix A, “PlateSpin Orchestrate Components: Install
Patterns,” on page 125
for details on the installation data that you need to know.
4g
Click
OK
to install the patterns.
You must install PlateSpin Orchestrate components before you can configure them.
5
Configure the PlateSpin Orchestrate components that you have installed. You can use one of
two methods to gather information for the configuration:
The PlateSpin Orchestrate product configuration script. If you use this method, continue
with
Step 6 on page 48
.
The GUI Configuration Wizard. If you use this method, skip to
Step 7 on page 49
.
NOTE:
The remaining steps in this procedure show the installation of the Orchestrate Agent as
an example of component installation. Steps for installing any of the other components are
similar. Refer to
Section 2.2.2, “PlateSpin Orchestrate Configuration Information,” on page 30
for further information you might need to configure a component.
6
(Conditional) If you use the PlateSpin Orchestrate product configuration script, run it from the
command line.
6a
Make sure the product ISO is accessible. The script copies some files from the ISO.
6b
Make sure you are logged in as
root
to run the configuration script.
6c
Run the script, as follows:
/opt/novell/zenworks/orch/bin/config
When the script runs, the following information is initially displayed:
Welcome to PlateSpin Orchestrate.
This program will configure PlateSpin Orchestrate 2.0
Select whether this is a new install or an upgrade
Summary of Contents for PLATESPIN ORCHESTRATE 2.0.2
Page 4: ...4 PlateSpin Orchestrate 2 0 Installation and Configuration Guide novdocx en 13 May 2009...
Page 20: ...20 PlateSpin Orchestrate 2 0 Installation and Configuration Guide novdocx en 13 May 2009...
Page 98: ...98 PlateSpin Orchestrate 2 0 Installation and Configuration Guide novdocx en 13 May 2009...
Page 130: ...130 PlateSpin Orchestrate 2 0 Installation and Configuration Guide novdocx en 13 May 2009...