Novell PLATESPIN ORCHESTRATE 2.0.2, Installation And Configuration Manual, Page: 119 / 132

First Use of Basic PlateSpin Orchestrate Components 119
no
vd
ocx
(e
n)
13
Ma
y 20
09
Job Status for userA.whoami.60
------------------------------
State: Completed
Resource Count: 0 (0 this job)
Percent Complete: 100%
Queue Pos: n/a
Child Job Count: 0 (0 this job)
Joblet Counts: 1 (0) (1 (0/0/1/0/0) this job)
Instance Name: whoami
Job Type: whoami
Memo:
Priority: medium
Arguments: resource=tszen4_agent
Submit Time: 12/24/2008 02:35:38
Delayed Start: n/a
Start Time: 12/24/2008 02:35:38
End Time: 12/24/2008 02:35:39
Elapsed Time: 0:00:00
Queue Time: 0:00:00
Pause Time: 0:00:00
Total CPU Time: 0:00:00 (0:00:00 this job)
Total GCycles: 0:00:00 (0:00:00 this job)
Total Cost: $0.0002 ($0.0002 this job)
Burn Rate: $0.8982/hr ($0.8982/hr this job)
Termination Type: n/a
Job Error: <none>
Joblet Error Count: 0 (0 this job)
Node Error Count: 0 (0 this job)
Excluded Nodes: 0 (0 this job)
Bad Provision Count: 0 (0 this job)
Excluded Provisions: 0 (0 this job)
zos log job_id --verbose
If you know the Job ID for a particular job that has run, you can use the
zos log job_id --
verbose
command to display its detailed job log. Running this command yields an output like this:
Agent connected with ID: user_userA_64 (comms ok), Session ID: 52
Launching 1 joblets for user 'userA'
[tszen4_agent] cmd=whoami
[tszen4_agent] root
[tszen4_agent] result=0
Agent ID: null logged out.
3.8.2 Verification at the Jobs Monitor
If you want to use the PlateSpin Orchestrate Development Client to verify that the job has run, you
can open the
Jobs Monitor to look at the Job Log and see the result of the job being run.
1 In the Development Client, click Jobs in the main toolbar to open the Jobs Monitor view.
2
In the Jobs Monitor view, click the Job Log tab to open the Jobs page in the workspace panel.