Novell PLATESPIN ORCHESTRATE 2.0.2, Installation And Configuration Manual, Page: 25 / 132

Installation and Configuration 25
no
vd
ocx
(e
n)
13
Ma
y 20
09
The list shows the products listed whose patterns you previously installed.
6d Determine which installed products you want to configure. The options are listed with
option numbers.
6d1 Select or deselect an option by typing its number to toggle its selection status, or type
a
and press Enter to select all of them.
6d2 When you have selected the products you want to configure, type
f
and press Enter
to finish the selection and begin the configuration.
For information to help you complete the configuration process, see
Section 2.2.2,
“PlateSpin Orchestrate Configuration Information,” on page 30
6d3 When the you have finished answering questions about the configuration, continue
with
Step 8 .
7 (Conditional) If you are using the GUI Configuration Wizard:
7a Enter the following command at the bash prompt of the machine where you installed the
PlateSpin Orchestrate patterns:
/opt/novell/zenworks/orch/bin/guiconfig
The GUI Configuration Wizard launches.
IMPORTANT: If you have only a keyboard to navigate through the pages of the GUI
Configuration Wizard, use the Tab key to shift the focus to a control you want to use (for
example, a
Next button), then press the spacebar to activate that control.
7b Click Next to display the license agreement.