ReadChannel
specifies the READ channel to use.
WriteChannel
is the
WRITE channel.
• For the
ctc
interface (no longer officially supported), specify the protocol that
should be used for this interface:
CTCProtocol=<0/1/2>
Valid entries would be:
Compatibility mode, also for non-Linux peers other than OS/390
and z/OS (this is the default mode)
0
Extended mode
1
Compatibility mode with OS/390 and z/OS
2
• Network device type
osa
with interface
lcs
:
ReadChannel=0.0.0124
Portname=1
ReadChannel
stands for the channel number used in this setup. A second port
number can be derived from this by adding one to
ReadChannel
.
Portnumber
is used to specify the relative port.
• Interface
iucv
:
IUCVPeer=PARTNER
Enter the name of the peer machine.
• Network device type
osa
with interface
qdio
for OSA-Express Gigabit Ethernet
and OSA-Express High-speed Token Ring:
ReadChannel=0.0.0524
WriteChannel=0.0.0525
DataChannel=0.0.0526
Portname=FEF400
Appendix
35
