Novatel WAAS G-III User Manual Download Page 35

Page: 35 / 146

Operation

Chapter 3

WAAS G-III Reference Receiver User Manual Rev 1

3.4.2.11

RxPosLatitude and RxPosLongitude

The

RxPosLatitude

and

RxPosLongitude

fields show the latitude and longitude of the G-III Reference Receiver

expressed in decimal degrees.

If the receiver position is not set, these fields are blank.

3.4.2.12

RxPosHeight

The

RxPosHeight

field shows the altitude of the G-III Reference Receiver expressed in metres.

If the receiver position is not set, this field is blank.

3.4.2.13

RxPosX, RxPosY and RxPosZ

These fields show the X, Y and Z coordinates of the G-III Reference Receiver expressed in metres.

If the receiver position is not set, these fields are blank.

Summary of Contents for WAAS G-III



















































































































































Search results

Summary of Contents for WAAS G-III

Reviews:

Related manuals for WAAS G-III

Brands by name

Popular brands

Novatel WAAS G-III, User Manual

Search results

Summary of Contents for WAAS G-III

Reviews:

Related manuals for WAAS G-III

Brands by name

Popular brands